PP packing belt making machine twin-screw sandwich PP packing belt production line with PLC-controlled extruder

PP packing belt making machine twin-screw sandwich PP packing belt production line with PLC-controlled extruder

DESCRIPTION OF PP STRAPPING EQUIPMENT

PP strapping equipment can be customized according to customer requirements and can extrude 2-12 PP straps at the same time.

PP strapping equipment is a high-end equipment used to produce PP strapping for a wide range of uses.

Raw materials------100% polypropylene new material or recycled material

Control method------ PLC control system, which can be set to different languages.

Motor------The equipment is driven by Siemens motor, which has stable and reliable performance and low failure rate.

Line speed------ 200-300 m/min

PP strapping production line process flow:

① Raw materials → ② Mixing raw materials → ③ Pre-drying raw materials → ④ Melting raw materials in the main machine and extruding → ⑤ Cooling and shaping the blank (strip blank) → ⑥ Heating and shaping in the oven → ⑦ Primary stretching → ⑧ Secondary stretching → ⑨ Embossing → ⑩ Tempering and shaping in the oven → ⑪ Cooling → ⑫ Finished product winding (online printing of fonts is supported)

PP strapping production line layout dimensions:
① Two PP extrusion lines simultaneously (one PP line for two extrusions):

Capacity: Approximately 2.5 tons/24 hours. Requires 1-2 operators. Total length approx. 28m * 2m * 4m (maximum).

Total power: 80KW. Operating power: 40-45KW.

② Three PP extrusion lines simultaneously (one PP line for three extrusions):

Capacity: Approximately 3.5 tons/24 hours. Requires 1-2 operators. Total length approx. 30m * 2m * 4m (maximum).

Total power: 90KW. Operating power: 45-50KW.

③ Four PP extrusion lines simultaneously (one PP line for four extrusions):

Capacity: Approximately 5-6 tons/24 hours. Requires 1-2 operators. Total length approx. 36m * 2m * 4m (maximum).

Total power: 100KW. Operating power: 50-55KW.

.

EXTRUSION PARAMETERS TABLE

Applicable to balers:

1. Fully automatic baler

2. High-speed baler

3. Semi-automatic baler

4. Handheld electric baler

5. Manual clamp baler

ABOUT AFTER-SALES

We provide comprehensive technical support and service for our PP strapping equipment. Our team of experienced technicians can provide a variety of services, including:

Pre-sales:

1.Layout plan of PP strapping equipment.

2.Analysis of the cost of PP strapping equipment.

3.Raw materials that can be used for PP strapping equipment.

After-sales service:

1.Water and electricity circuits of PP strapping equipment, circuit drawings, etc.

2.Installation, commissioning and training of PP strapping equipment.

3.Maintenance service of PP strapping equipment.

4.Regular maintenance and repair

5.Troubleshooting and diagnosis

6.Software updates and upgrades

7.Spare parts and accessories

8.Training and technical advice

FAQ:

Q:What is the voltage of PP strapping equipment?
A:380V/50HZ, we support customization
Q:Can thePP strapping equipment be customized according to the factory length?
A:Yes, we can customize the length according to the customer's factory size.
Q:Where is the PP strapping equipment produced?
A:We are from China.
Q:Can PP strapping equipment provide after-sales service?
A:Yes, we have professional after-sales engineers who provide 24-hour online guidance.
Q:Is the quality of PP strapping equipment stable?
A:We have 30 years of manufacturing experience, and have their own PP packaging belt production plant, equipment quality is stable, the process is worth choosing.
Q:Does PP strapping equipment support customization?
A:We are a manufacturing plant that can customize model size, extrusion capacity, voltage and so on according to customer requirements.

PP packing belt making machine with PLC control

twin-screw PP packing belt production line

sandwich PP strap extruder with warranty

PP packing belt making machine twin-screw sandwich PP packing belt production line with PLC-controlled extruder Images